Precor C842i User Manual Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 72
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
Product Owner’s Manual: Maintenance 24
Troubleshooting Error Codes
If any error codes appear in the display, call an authorized service
person for assistance. Refer to Obtaining Service.
Troubleshooting Heart Rate
Table 1 may help you understand and troubleshoot erratic heart rate
readings.
Important: A heart rate can only be detected when the Precor heart
rate receiver is properly installed in the display and the user
maintains a minimum of 20 RPM. A user must also wear the chest
strap on the C842i or grasp both touch-sensitive handlebar grips
on the C846i.
Table 1. Erratic heart rate readings
Note: To conduct electrical impulses from a user’s heart, both
touch-sensitive handlebar grips (C846i) must be grasped firmly for
five to ten seconds. Usually, the concentration of salts in a person’s
perspiration provides enough conductivity to transmit a signal to the
receiver in the display console. However, because of body chemistry
or erratic heartbeats, some people cannot use the touch-sensitive
heart rate feature. A chest strap may provide better results.
What appears on
the display Cause What to Do
Nothing The heart rate receiver
is not installed or it has
been disconnected.
Call Customer Support.
Refer to Obtaining Service.
— — — A signal is being
detected through the
chest strap, but a valid
heart rate is not yet
established.
Be sure that the chest strap
is moist, centered, and in
direct contact with the user’s
skin. Wait a few moments to
see if the user’s heart rate
appears.
Pulsing Hr A signal is being
detected through the
touch-sensitive
handlebar grips, but a
valid heart rate is not
yet established.
Ask the user to grasp both
handlebar grips (C846i only)
until his or her heart rate
appears.
What appears on
the display Cause What to Do
Page view 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 71 72

Comments to this Manuals

No comments