Precor C842i User Manual download pdf (Page 19)

Product Owner’s Manual: Club Features 17

Displaying the Serial Number

SERIAL NUMBER appears on the display followed by the

13-digit serial number. The serial number is helpful when you

contact Customer Support.

Note: If no serial number has been entered, then NO SERIAL

NUMBER appears. Use the serial number found on a label on

the rear cover (Diagram 1).

11.If you have not already done so, write the serial number onto the

Warranty Registration card. You can also register online at

www.precor.com.

12.When you are ready, press ENTER to return to the Precor

banner.

User ID Entry with CSAFE Equipment

The C846i cycle is fully compatible with CSAFE protocols. When

the unit is connected to a CSAFE master device and the user

maintains a pedal speed above 20 revolutions per minute (RPM), the

user is prompted for a user ID.

Note: If the optional power adapter is being used, then no pedaling

is necessary for user ID entry.

The user ID is displayed as five zeros. The left most zero blinks

indicating you starting point. The following table describes key

functions while in CSAFE mode.

Keypad Description

PROGRAM CHANGE ▲ or ▼ moves the blinking LED from

column to column

RESISTANCE ▼ or ▲ changes the number value in the in

the selected column

Number keypad use the number keys to enter a user

ID. The number that is pressed

appears in the display and the next

column begins to blink. When all

five numbers are in place, the user

must press ENTER to submit the

user ID.

ENTER submits the user ID.

Note: User ID entry is bypassed

when the user enter five zeros. No

workout statistics are recorded.

RESET resets the display to the Precor

banner.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 71 72

No comments

Precor C842i User Manual Page 19