Precor C842i User Manual download pdf (Page 22)

Product Owner’s Manual: Maintenance 20

Long-Term Storage

When the cycle is not in use for any length of time, ensure that the

optional power adapter is unplugged from its power source and is

positioned so that it and the power cord will not become damaged

or interfere with people or other equipment.

Adjusting the Seat

To avoid knee strain, it is important that you inform your patrons

about positioning the seat properly.

To check for proper seat position, be sure users take the following

steps:

1. Sit on the seat.

2. Place each foot on a pedal (inside the pedal straps).

3. Observe the position of each leg. The extended leg should be

slightly bent at the knee in a 10 to 15 degree angle.

If seat adjustment is needed, refer to the following instructions.

Upright Seat Adjustment

1. Dismount and hold the post underneath the seat with one hand

while you pull out the seat post adjustment pin (pop pin) with the

other hand. Refer to Diagram 7.

2. Slide the seat post up or down into the desired position and then

release the seat post adjustment pin.

3. Before sitting on the cycle, press down firmly on the seat to make

sure it does not slip. Check that the pop pin is secure inside the

seat post.

Diagram 7: Adjusting the seat on the C842i Upright Cycle

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 71 72

No comments

Precor C842i User Manual Page 22