Precor C954i Service Manual download pdf (Page 39)

C954, C956 Treadmill

Page 39

13. Slide the allen wrench into the left hand (upper) lift pin alignment hole and tap the lift pin into

its frame bushing as described in step 12.

14. Slide the retaining bolt into its mounting hole and apply slight inward pressure on the

retaining bolt. Rotate the lift pin using the allen wrench until you feel the retaining bolt “drop”

into its chamfered and threaded hole in the lift pin. Hand thread the retaining bolt into the lift

pin as far as possible. Care must be taken to ensure that you do not cross thread the

retaining bolt.

15. Hand thread the right hand (lower) retaining bolt into the lift platform as described in step 14.

16. Tighten both lift platform retaining bolts.

17. Fasten the lift motor tube to the lift platform with the clevis pin and hitch pin removed in step

18. Check treadmill operation per Procedure 3.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 72 73

No comments

Precor C954i Service Manual Page 39