Precor C954i Service Manual download pdf (Page 38)

C954, C956 Treadmill

Page 1-38 Page 38

Diagram 6.2 - Lift Platform Mounting (version 3)

9. Slide a 5/32 inch allen wrench or similar slender tool into the alignment hole as shown in

Diagram 6.3. Pull the right hand (lower) lift pin out of the treadmill frame.

Diagram 6.3 - Lift Pin Removal

10. Pull the left hand (upper) lift pin out of the treadmill frame in the same manner as in step 9.

Remove the lift platform from the treadmill.

11. Remove both wheels from the lift platform and re-mount them on the replacement lift

platform.

12. Set the replacement lift platform in its mounting position. Slide the allen wrench into the right

hand lower lift pin alignment hole as shown in Diagram 6.3. Carefully, alignment the lift pin

with its mating bushing in the treadmill frame and tap the lift platform into the frame bushing

with a rubber mallet. The pin should be in as far as possible while still allowing the allen

wrench to be easily removed.

Retaining

Bolt

Alignment

Hole

Lift

Platform

Lift Pin

Allen

Wrench

Lift Pin

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 72 73

No comments

Precor C954i Service Manual Page 38