Precor C954i Service Manual download pdf (Page 72)

P0650998102 C95X Stop Button RetroFit Kit Instructions, rev. B

Page 3 of 4

10. Route the Data cable and Hand Held Heart Rate (HHHR) cable (if equipped), between the two mounting

posts, to the front of the dash console. (Photo 9)

11. Insert the micro switch into the STOP switch mounting plate, and connect the micro switch connecting cable

to the micro switch. Either connector on the micro switch connector cable maybe connected to either

terminal of the micro switch, polarity is not critical. (Photo 10, 11)

Photo 10 Photo 11

12. Mount the STOP switch mounting plate to the mounting posts with two of the screws provided. Tighten the

screws at this time. (Photo 12)

Warning: If the safety cord is improperly routed, the function of the Safety STOP button will not work.

13. Place the new STOP button into place on the dash console. Verify that the safety cord is routed in front of

the STOP button “Hook” (Photo 13) and not between the dash console and the STOP button “Hook” (Photo

14).

Photo 9

Photo 12

Mirco Switch

Micro Switch

Connecting Cable

Micro Switch

Mounting Plate

Connector/terminal

1 2 ... 67 68 69 70 71 72 73

No comments

Precor C954i Service Manual Page 72