Precor Treadmills 932i Service Manual download pdf (Page 46)

C932, C932i, C934, C936i Treadmilll

Page 46

Procedure 6.11 - Removing and Replacing the Hood

1. Set the treadmill circuit breaker in the “off” position and unplug the treadmill’s line cord from

the AC outlet.

2. Remove the four bolts that mount the hood the treadmill. Note that only two front bolts utilize

flat washers

3. Remove the hood from the treadmill.

4. The rear hood mounting nuts are mounted in slots and are able to “float”

Diagram 6.8 - Rear Hood Mounts

5. Set the replacement hood in its mounting position. Using a thin bladed screwdriver or similar

tool into one of the rear hood mounting holes and use the screw diver to align the hood

mounting nut with the hole in the hood. Hand start one of the rear hood mounting bolts.

6. Repeat step 5 for remaining rear hood mount.

7. Hand start the two front hood mounting bolts. Torque all four hood mounting bolts to 120

inch pounds.

Rear Hood

Mount

1 2 ... 41 42 43 44 45 46 47 48 49

No comments

Precor Treadmills 932i Service Manual Page 46