Precor Treadmills 932i Service Manual download pdf (Page 10)

C932, C932i, C934, C936i Treadmilll

Page 10

15. The errors will be displayed as; 1: ERXX

16. The arrows keys will allow you to scroll through the log.

17. When the QUICK START key is held for 2 seconds the message CLEAR? will be displayed.

If the QUICK START key is held for an additional 2 seconds, the message OK will be

displayed. When the QUICK START key is released the message NO MORE ERRORS will

be displayed and all error are erased from the log.

18. Press the RESET the ENTER key to exit the information display.

19. The display will scroll MILES: XXXX. This display will indicated the total number of miles

logged on the treadmill.

Note: The odometer data is stored in non-volatile memory on the upper PCA. If the upper PCA

is replaced the odometer data will be lost.

20. Press either the RESET or SELECT key.

21. The display will scroll HOURS: XX. The display will indicate the total number of hours of

use.

22. Press either the RESET or SELECT key.

23. The display will scroll UPPER SW: VER X.XX LOWER SW: VER X.XX. The display will

indicate the currently installed upper and lower software versions.

24. Press either the RESET or SELECT key.

25. If the error log is empty, the display will scroll NO ERRORS. If there are errors in the error

log the display will scroll the first (most recent) error as: 1: ERXX at XXXX MILES XX

HOURS.

26. The

 keys will move you forward and backward through the error log entries. When the

last entry has been displayed the display will scroll NO MORE ERRORS.

27. If you wish to clear all errors from the error log, press and hold the QUICK START key. The

display will scroll HOLD QUICK START TO CLEAR ERROR LOG. OK will be displayed

when the error log has been cleared.

28. Press either the RESET or SELECT key to exit the information display.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 48 49

No comments

Precor Treadmills 932i Service Manual Page 10