Precor EFX546 Service Manual download pdf (Page 55)

C546 Self Powered Elliptical Fitness Crosstrainer

Page 55

Diagram 7.12 - Top Cover Section (with right & left cover sections removed)

6. If all four cover sections have been removed, first replace the frame cover and front cover

section, then the top cover section and then the left and right cover sections as described

below.

7. Slide the tongue of the frame cover into the ramp. Lift the rear of the frame cover and fit the

front cover against the frame cover. Slide the front and frame covers into place as a unit.

Replace and tighten the four phillips screws that fasten the frame cover to the frame.

Replace and tighten the two phlliips screws that fasten the front cover section to the frame.

8. Set the top cover section in it’s mounting position, replace and tighten the two phillips

screws that fasten the top cover section to the frame upright. See Diagram 7.12. Replace

and tighten the three screws that fasten the top cover section to the rear cover support.

Replace and tighten the two screws that fasten the top cover section to the front cover

section.

9. Set the left cover section in it’s mounting position, replace and tighten the four screws that

fasten the left cover section to the front cover section, top cover section and rear cover

support.

10. Set the right cover section in it’s mounting position, replace and tighten the four screws that

fasten the right cover section to the front cover section, top cover section and rear cover

support.

Frame

Upright

Mounting

Screw

Top Cover

Section

Front Cover

Section

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 65 66

No comments

Precor EFX546 Service Manual Page 55