Precor Strength-Training S3.25 User Manual download pdf (Page 28)

S3.25 Assembly and Maintenance Guide

page 28

1 2 3 4 5 6

E. In the middle hole on the Press Arm Flats, make a

retainer pin using

one 2-inch bolt

two washers

one barrel spacer

one locknut

Finger tighten.

F. Wrap the Cable over one 3½-inch pulley and attach

it to the bottom hole on the Press Arm Flats using

one 2-inch bolt

two washers

one locknut

G. Wrench tighten. Do not overtighten.

H. Attach two large floating Pulley Plates (found in

Box 2) to one 4½-inch pulley using

one 2-inch bolt

two washers

one locknut

Finger tighten.

I. Place the pulley on the cable loop from Cable

44370-103.

J. Loop center Cable 44371-103 from the Cable Tree

around a 4½-inch pulley and attach it to the

remaining holes in the floating Pulley Plates using

one 2-inch bolt

two washers

one locknut

K. Wrench tighten.

Step 14. Feed Cable From Cable Tree, Continued

1 - 2" bolt

2 - washers

1 - barrel spacer

1 - locknut

1 - 3½" pulley

1 - 2" bolt

2 - washers

1 - locknut

1 - 4½" pulley

1 - 2" bolt

2 - washers

1 - locknut

1 - 4½" pulley

1 - 2" bolt

2 - washers

1 - locknut

44370-103

44371-103

Barrel

Spacer

Press Arm

Flats

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

Comments to this Manuals

No comments

Precor Strength-Training S3.25 User Manual Page 28

Comments to this Manuals

Related products and manuals for Sports and recreation Precor Strength-Training S3.25