Precor Strength-Training S3.25 User Manual download pdf (Page 21)

S3.25 Assembly and Maintenance Guide

page 21

1 2 3 4 5 6

10. Assemble Chest Press Seat

A. Place the Backpad and Headrest on the floor. Place

the Long Support Tube and Short Support Tube on

the Backpad. Attach at the top using

two 1¼-inch bolts

two washers

B. Attach at the bottom using

three 3-inch bolts

three washers

C. Attach the Backpad and Headrest assembly to the

Chest Press Upright using

one ½-inch x 5¼-inch bolt

two washers

one locknut

Finger tighten.

Note: The Stop Pad on the seat assembly should

be between the Pop Pin and the Support Stop on

the Chest Press Upright.

D. Wrench tighten, still allowing movement.

CAUTION: If you move the Handlebars out of

the way for this step, be careful that they don’t

hit you.

E. Attach the Seat Pad to the Seat Stem using

two 1¼-inch bolts

two washers

Wrench tighten.

Note: If you have purchased the Leg Press Option,

open the S3.25 Leg Press Option box now and begin

with Step 2.

Step 10. Assemble Chest Press Seat

Long Support

Tube

Seat Pad

Backpad

1 - ½" x 5¼" bolt

2 - washers

1 - locknut

Seat Stem

Short

Support

Tube

2 - 1¼" bolts

2 - washers

Long Support Tube

Short

Support

Tube

3 - 3" bolts

3 - washers

2 - 1¼" bolts

2 - washers

Short Support

Tube

Long

Support

Tube

Backpad

Stop Pad

Pop Pin

Chest Press

Upright

Headrest

The Backpad and Headrest are not

shown in this illustration.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

Comments to this Manuals

No comments

Precor Strength-Training S3.25 User Manual Page 21

Comments to this Manuals

Related products and manuals for Sports and recreation Precor Strength-Training S3.25