Precor DISCOVERY SERIES_DBR0817 User Manual download pdf (Page 28)

Calf Raise Assembly Guide: Assembling the Equipment 10

Attaching the Weight Horn

Once the stop arm is in place and the movement arm is stable, you can attach

the weight horn to the end of the movement arm.

To attach the weight horn:

1. Insert the horn into the outward side of the weight horn fitting on the

movement arm. Slide the weight horn into the fitting until it stops.

2. Insert a M12 x 35 mm socket head machine screw with 13 mm flat washer

through the movement arm and into the weight horn. Tighten the screw

completely.

Figure 9: Weight horn attachment

3. Insert two M8 x 6 mm set screws into the screw holes on the weight horn

fitting. Tighten the set screws completely.

Figure 10: Set screw positioning

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Precor DISCOVERY SERIES_DBR0817 User Manual Page 28