C762, C764, C764i Stairclimber
Page 66
Replacing the Return Spring
5. Visually inspect the grommet for wear, cracks, or other damage. Replace the grommet if
necessary.
Note:
Each spring bracket has two holes. Insert the spring into the outer hole on the bracket when you
perform the next step (see Diagram 7.11).
6. Insert one end of the return spring in the spring bracket.
Note:
When you perform the next step, make sure that the end of the spring points down when you
place it in the clamp.
7. Place the other end of the return spring in the grooved belt clamp. Position the spring as
shown in Diagram 7.11.
Diagram 7.11 - The Return Springs
Comments to this Manuals