Precor S3.45 User Manual download pdf (Page 29)

S3.45 Assembly and Maintenance Guide

page 29

1 2 3 4 5 6

16. Attach Handlebars

A. Slide each Handlebar (one at a time) onto the Pivot

Shaft and attach it using

one ½-inch washer

one ½-inch hat washer

one locknut

Note: Tighten the locknut until the Handlebars

don't move. Then, loosen the locknut about one-

half turn until the arms pivot freely. Note that a few

threads should show beneath the Pivot Shafts, if

you have tightened it properly.

B. Secure the plastic caps over the locknuts.

A rubber mallet may be useful to lightly tap the

caps into place.

Step 16. Attach Handlebars

Press Arm

Assembly

1 - plastic cap

Handlebars

Pivot Shaft

1 - ½" washer

1 - ½" hat washer

1 - ½" locknut

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 53 54

No comments

Precor S3.45 User Manual Page 29